Posted on: 07.09.2023 Posted by: Редакция Comments: 0

Mounting a TV on your wall is not necessarily a fun task, but it is often necessary. TVs can take up a lot of space, so sometimes mounting them on the wall is the best option. However, does mounting a TV damage the wall?

Technically, mounting a TV does damage the wall as it needs to be drilled to make holes. If the holes are not drilled properly or if the wall is accidentally hit during the TV installation, it can cause further damage. Mounting a TV is not a problem if you don’t mind the holes in your wall.

This article will explain how to mount a TV without damaging your wall. We will look at how you can do it without using a drill, but note that even these methods still leave holes in your wall.

How to mount a TV without damaging the wall

The best way to mount a TV without damaging the wall is to use a no-stud hanger mount. This type of mount uses tiny nails that you hammer into the wall. While it does leave a small hole, it is significantly smaller than a drilled hole.

A regular TV wall mount is still the best method for mounting a TV. However, if you are renting, your landlord may not allow you to drill holes.

Using small nails to secure the TV is treated as wear and tear instead.

You could also consider using screw and anchor to secure the TV if you don’t need to remove them anymore

Unfortunately, you cannot mount a TV on the wall without using at least tiny nails.

You can try it with strong adhesive tape, but it is not worth risking breaking an expensive TV to protect the wall.

The problem with adhesive is that it loses adhesion due to moisture and heat. There is moisture in your home and the TV gets quite warm, so both are present.

Note that you need to do it right if you choose traditional drill holes. Drilling a hole in the wrong spot or too deep will result in significant damage.

Measure everything five times before turning on the drill.

Use your screwdriver to mark where you want the holes to be. This will allow you to drill where you want and stay straight.

Can you mount a TV without drilling holes in the wall?

You cannot mount a TV without drilling holes in the wall. At the very least, you will need to use tiny nails that leave a few small holes. Some people suggest using adhesive tape, but that doesn’t hold the TV very well.

The answer really depends on what you consider as a hole. Most people think of drilled holes in this case.

If so, you can mount a TV without any holes. But you will still need to use small nails.

Get the Hangman Products No Stud TV Hanger Mount (available at It is sturdy, comes with a built-in level, and does not damage the wall.

The installation is quite simple. Hammer in a few nails, and the mount stays in place. Then screw in the TV brackets and hang the TV as if it were a picture.

How to repair a hole in your wall caused by a TV mount

Attaching nails or drilling holes may seem daunting at first. After all, you have never done it before.

But anyone can do a great job without much practice. You just need spackle and a scraper or putty knife. In a pinch, you can even use a regular knife.

Here’s how to fix a hole left by a TV mount in your wall:

  1. Fill the hole with spackle.
  2. Smooth it out with a scraper or putty knife.
  3. Remove any excess paste.
  4. Paint over the paste to cover it completely.

It’s that simple. Nevertheless, you will feel accomplished and fulfilled.

If you don’t have spackle, get the Red Devil Onetime Lightweight (available at It is easy to use, dries quickly, and you don’t need to sand it once you have filled the hole.

How to mount a TV on the wall without a drill

There are two ways to mount your TV on the wall if you don’t have a drill. Let’s look at both so you can decide which is suitable for you.

Drywall anchors

Did you know that you can screw in a drywall anchor with a regular screwdriver?

However, you will need to use self-drilling anchors. Get the self-drilling plastic anchors from Qualihome (available at They can hold up to 34kg (75lb.), so hanging a TV is not a problem.

Here’s how to do it:

  1. Use a pencil to mark the spot where you want to screw in the anchor. Use your TV wall mount as a guide.
  2. Repeat this for all corners.
  3. Make sure the corners are level.
  4. Make small holes with a screwdriver at the spots where the anchors are supposed to go.
  5. Screw the anchor in with your screwdriver.

No Stud Hanger Mount

We have already talked about no-stud hangers, but they are the easiest way to attach a TV to the wall.

You only need a hammer and some nails that usually come with the no-stud hanger mount.

Here’s how to do it:

  1. Hold the mount against the wall and center it. Use the built-in level to make sure it is level.
  2. Tap the middle nail through the hole in the mount with your hammer.
  3. Tap in the corner nails.
  4. Tap in any other nails.
  5. Screw the included mounting brackets into the VESA mounting holes on your TV.
  6. Carefully hang the TV on the wall.

A tall TV stand is a good alternative to wall mounts

A TV stand is a great alternative to mounting the TV on the wall.

You can achieve great viewing angles, it is easier to move the TV, and, most importantly, you don’t leave any holes in the wall.

Tall TV stands use the same type of mounts you would see with traditional wall mounts. Therefore, any TV with VESA mounting holes is compatible.

The Perlesmith Universal TV Stand (available at is a great option. It is very easy to mount your TV on it, and it is height-adjustable, so you get the look of a wall-mounted TV without drilling holes.

Final thoughts

To mount a TV on the wall, you will either need to drill holes or drive nails. Both methods leave some kind of hole in your wall. If you want to avoid wall damage, consider opting for a TV stand instead to avoid holes in your wall.

Leave a Comment